List of Contributions

Craig Kokay

Contact Details

My Content

1 to 20 of 38 total
Posted By Craig Kokay 06-14-2022 00:17
Found In Egroup: MxLoader
\ view thread
My client asked to translate the following to use in the MXLoader. (targstartdate = '2022-05-05' or schedstart => '2022-05-05') and status in ('COMP,','CLOSE') They are using REST as the source and API as the authentication, So, part of the statement translates to status in ["COMP","CLOSE"] but, ...
Posted By Craig Kokay 06-06-2022 09:14
Found In Egroup: Maximo Open Forum
\ view thread
Hi AJ, The asset lives at the Site level, the associated form to the asset (INSPFORMUSEWITH) lives at the Site level, and the form lives at Org. When you move the asset to another Site, the information in the INSPFORMUSEWITH does not also get updated. This makes sense as the associated inspection may ...
Posted By Craig Kokay 05-10-2022 21:05
Found In Egroup: Maximo Open Forum
\ view thread
Have you thought about using an automation script? The question is when do you need it to fire. ------------------------------ Regards, Craig Kokay ISW Maximo Practice Manager eMail: ckokay@isw.net.au Phone: +61-411-682-040 #IBMChampion2022 ------------------------------
Posted By Craig Kokay 05-10-2022 20:47
Found In Community: Maximo Open Forum
\ view thread
This is one of those classic faults that IBM have built-in. Even if you change the template when it pushes out, it's only pushing out the new entry and thus causing your issue. You will need to remove all traces of the meters from the assets, or use the new higher number.
Posted By Craig Kokay 05-10-2022 20:45
Found In Egroup: Maximo Open Forum
\ view thread
I have been experiencing the error when a user simply selects either the Work View or Assignment view in GA. The simple solution is to select the "Refresh Work List", but I should have to do that if I don't want to refresh. NB: The "Refresh When Opening the Gantt View?" is not selected. So, if I look ...
Posted By Craig Kokay 03-12-2022 08:36
Found In Community: Maximo Open Forum
\ view thread
If you have Maximo for Transportation, where using PM relationships, you can say after the PM1 to deactive itself and activate PM2. There is no other clean way of doing this. You have to have two different PM's because if you one PM the base freq=50hrs, so JP1 interval=1 (or 50 hrs, and JP2 interval=5 ...
Posted By Craig Kokay 02-21-2022 17:17
Found In Egroup: Maximo Open Forum
\ view thread
Tis a small thing, but reach out to Bruno ------------------------------ Regards, Craig Kokay ISW Maximo Practice Manager eMail: ckokay@isw.net.au Phone: +61-411-682-040 #IBMChampion2022 ------------------------------
Posted By Craig Kokay 02-17-2022 10:15
Found In Egroup: Maximo Open Forum
\ view thread
Did you know that you can configure the text for the bars in the Gantt chart? Did you know that you can configure the text for the tooltips of the bars in the Gantt chart? We'll you can. This could solve some of your issues and frustrations when on the Assignment View tab in particular. So have a look ...
Posted By Craig Kokay 02-17-2022 09:55
Found In Egroup: Maximo Open Forum
\ view thread
For most people in the role of administring Maximo, the usual title is Maximo Administrator, that is different to a Maintenance Supervisor. Maximo Administrator is responsible for: providing advisory services i.e. you want to do that with Maximo, then gentle advise that is silly provide data correcting ...
Posted By Craig Kokay 02-10-2022 16:18
Found In Egroup: Maximo Open Forum
\ view thread
Hi Jason, I think that there is still utter confusion! Firstly, let's discuss the word independent. You have four job plans: A, B, C, and D. The frequency does not matter. Typically, each subsequent job includes all the activities of the prior, but this is not always true, so this gives: (Scenario A) ...
Posted By Craig Kokay 01-26-2022 04:01
Found In Community: Maximo Open Forum
\ view thread
Hi Anne, I was immediately thinking "how silly", but then the brain kicked in and told me not to be stupid. An escalation that fires an automation script screams out to me as the solution. Now for the further thoughts. There are three levels involved: Item at the ITEMSET Org at well the Org level Inventory ...
Posted By Craig Kokay 01-21-2022 18:23
Found In Egroup: Maximo Open Forum
\ view thread
It's great to see that eAudit is being used. It has its issues, in that it does not have a memo capability. What is being missed is the use of eSignature which does support recording of a reason for the change. ------------------------------ Regards, Craig Kokay ISW Maximo Practice Manager eMail: ckokay@isw.net.au ...
Posted By Craig Kokay 01-07-2022 17:10
Found In Community: Maximo Open Forum
\ view thread
Hi Troy. We understand a bit more now that we have more information, so I'm going to add some more detail, but also add that it's working as per design or rather, it's also worked this way. I have four items: CDKOBS (obsolete at the Item Master), CDKOBS2 (obsolete at the Inventory), CDKOBS3 (active at ...
Posted By Craig Kokay 01-06-2022 18:03
Found In Community: Maximo Open Forum
\ view thread
An item that has been out into inventory will have a status in the Item application, then in the Item/Organization menu setting in the same application, and finally at the Inventory application. If you make the Item in the Inventory application obsolete, then you can still order the item, but not if ...
Posted By Craig Kokay 01-06-2022 08:50
Found In Egroup: Maximo Open Forum
\ view thread
Hi Christoper, I appreciate the playbook getting updated, it must be challenging though keeping up with the new versions of MAS as most of the links point to old versions of MAS. ------------------------------ Regards, Craig Kokay ISW Maximo Practice Manager eMail: ckokay@isw.net.au Phone: +61-411-682-040 ...
Posted By Craig Kokay 11-15-2021 17:43
Found In Egroup: Maximo Open Forum
\ view thread
Hi Kathy, Correct, version 42 of Firefox is one solution. It's weird, but it does seem fixated on no using the newer version. Since you do have version 42, try removing then reinstalling. This is my little script: Remove FireFox --------------- rm -fr .mozilla​ Install Firefox ----------------- cd ...
Posted By Craig Kokay 11-15-2021 15:27
Found In Egroup: Maximo Open Forum
\ view thread
Hi Steve, Inspection forms are at ORG level, a somewhat annoying feature. I have tried multiple scenarios and cannot produce the error you have experienced, therefore I look towards the steps leading towards you getting the error. Q: What status is the form? Q: Is the inspection form being added to ...
Posted By Craig Kokay 11-10-2021 05:25
Found In Egroup: Maximo Open Forum
\ view thread
Hi Herman, I appreciate and understand how having more control over the CLASSSTRUCTUREID makes it easier than using the HIERARCHYPATH. So in review, exposing the CLASSSTRUCTUREID and overriding the given value when creating a new classification will be your solution. If you want to fix the existing ...
Posted By Craig Kokay 11-10-2021 00:36
Found In Egroup: Maximo Open Forum
\ view thread
Hi User 1972, Yes, you should be able to, not sure of the code. But I have learned something new and that is exciting. That is the listagg function. Simple and effective. Doing views, in general, is very simple, so I'd be curious why you think it's hard. Like Jeff has said, create the view using SQL ...
Posted By Craig Kokay 11-10-2021 00:13
Found In Egroup: Maximo Open Forum
\ view thread
The CLASSSTRUCTUREID is normally not shown within the application, so that part of the screen has been changed. As for you wanting to change a primary key field, the answer is no, not once the record is saved except by using an SQL statement, not a technique I'd endorse. I have altered my screen to ...